Ssimder TIG-200 TIG/Stick Schweißer

The Simder Welder TIG-200 is a 160A 2-in-1 Lift TIG and stick welder that runs on 110V or 220V, welds stainless steel, titanium, and carbon steel, and costs $160.99. Post-flow gas control keeps the tungsten and weld pool protected after the arc stops, making it a clean entry into TIG welding for home garages and small shops.

At a Glance

Built For

• TIG beginners — Lift TIG start is more forgiving than scratch-start, at a $160.99 entry price
• Stainless & precision work — clean DC TIG arcs on stainless, titanium, and carbon steel
• Dual-voltage shops — 110V household outlets or 220V for full 160A output
• Stick backup — switch to stick mode for rusty or thick steel without a second machine
• Not for aluminum — this is a DC machine; aluminum TIG needs AC, see the TIG-250AC
• Not for production lines — DIY/prosumer duty cycle

Full Specifications

How It Compares

What is Lift TIG and why does it matter?

Lift TIG starts the arc by touching the tungsten to the metal and lifting — simpler and cleaner than scratch-start, without the high-frequency interference of HF start. It protects your torch and electronics while staying affordable.

What does post-flow gas control do?

After you release the trigger, gas keeps flowing for a set time. This shields the cooling weld pool and tungsten from oxidation — the difference between a clean bead and a contaminated one.

Can it weld stainless steel?

Yes — DC Lift TIG is ideal for stainless, titanium, carbon steel, alloy steel, and copper. Use pure argon and appropriate filler rod.

Does it run on 110V?

Both. 110V household outlets for light work, 220V for the full 160A output. A 220V conversion cord is included for US/CA orders.

What's the difference between TIG-200 and TIG-250AC?

The TIG-200 is DC-only (steel, stainless, titanium) at $160.99. The TIG-250AC adds AC TIG for aluminum, HF start, and pulse, at $359.99. Choose by metal: no aluminum work — TIG-200 is the value pick.

Bike frame and exhaust repair

DC TIG on thin-wall steel and stainless tubing — the precise heat control of Lift TIG keeps thin metal from burning through.

Kitchen and shop stainless work

Stainless sinks, counters, and brackets weld clean with post-flow protection on every finish.

Farm repair with a stick fallback

Precision TIG for clean work, then flip to stick mode for rusty gates and thick machinery — one machine, both jobs.

What's included in the box?

WP17V TIG torch, electrode holder, ground clamp, 220V conversion cord (US/CA orders), gas hose, and operation manual.

Can it weld aluminum?

No — the TIG-200 is a DC machine. Aluminum requires AC TIG; look at the Simder TIG-250AC.

Does TIG welding need gas?

Yes — 100% argon for steel and stainless. A gas hose is included; you supply the bottle and regulator.

Is it good for beginners?

Yes. Lift TIG start is more forgiving than scratch-start, and post-flow protects your weld while you learn.

Can I use it as a stick welder too?

Yes — 2-in-1 means stick mode is built in. Switch over for rusty, thick, or outdoor work.

Does it support a foot pedal?

The TIG-200 supports current adjustment on the panel; the foot pedal is designed for the TIG-250AC and HF TIG setups.

Normalerweise dauert es 3-4 Tage, bis wir die Bestellung bearbeitet haben. Wenn die Bestellung unser Lager verlässt, wird sie innerhalb von 4-6 Werktagen an unsere US-Kunden ausgeliefert. In Regionen wie AK, PR und HI kann es länger dauern. In andere Länder müssen wir von unserem chinesischen Lieferanten aus liefern. Das dauert länger. Die Lieferung erfolgt innerhalb von 20-30 Tagen.

• 1 * SSIMDER TIG200 Schweißgerät
• 1 x 13ft WP-17 WIG-Schweißbrenner (mit Zubehör)
• 1*110V/220V Adapterkabel
• 1 * 7ft elektronischer Halter
• 1 * 4ft Erdungsklemme
• 1 * 9ft Argongasschlauch
• 4 * schlauch klemme
• 1 * Bedienungsanleitung

(Ohne Wolframelektrode)